Gnee (Tianjin) Multinational Trade Co., Ltd.
Gnee (Tianjin) Multinational Trade Co., Ltd.
Add to Cart
Cold Rolled Non-Oriented Electrical Silicon Steel For EI Core Laminate Sheet Properties Manufacturer 50w800 M80050A
The difference between oriented silicon steel and non-oriented silicon steel
Non-oriented silicon steel: ferrosilicon alloy with very low carbon content. In the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are mainly used to manufacture motors and generators.
Oriented silicon steel: It has strong directionality, the lowest iron loss value in the rolling direction, the highest magnetic permeability, and a higher magnetic induction value under a certain magnetization field. The silicon content of oriented silicon steel is about 3%. It also requires a low content of oxide inclusions in the steel and must contain certain inhibitors (MnS, A1N)..
|
Product Name
|
Electrical Steel, Silicon Steel, motor Steel
|
|
Category
|
Grain-Oriented Electrical Steel; Non-oriented electrical steel
|
|
Standard
|
AISI, ASTM, DIN, GB, JIS, EN
|
|
Thickness
|
0.35mm,0.50 mm,0.65mm
|
|
Width
|
50-1250 mm
|
|
Insulating Coating
|
||
|
Coating types
|
M11
|
M21
|
|
Component
|
Chromium containing , semi organic coating
|
Chromium free, semi organic coating
|
|
Coating thickness(μm)
|
0.7~1.5
|
0.8~5.0
|
|
Interlayer resistance(Ω•mm2 /slice)
|
≥100
|
≥100
|
|
Adhesive property
|
Class A or class B
|
Class A or class B
|
|
Punching property
|
Excellent
|
Excellent
|
|
Antirust property
|
Excellent
|
Excellent
|
|
Heat resisting property
|
Resistant annealing at 750 C, N2 protection, for 2h
|
Annealing resistance in general
|